There are many types of power fittings with different uses. They are generally used in the power industry and the electrical industry. This is known to all in the industry. It is used to fix and connect various hard or soft bus bars and pillar insulators in power distribution devices. There are various wire clamps for installing wires, various crimping pipes and repair pipes for connecting wires, various types of spacer rods on split wires, various types of cable fittings for pole towers, and fixed pole tower cable fittings and Wire clamps include protective fittings (protective fittings) for protecting wires, various hanging rings that make up the insulator string, and grounding conductors for protecting wires, etc.
Regardless of whether it is used in the power industry or in the electrical industry, it should generally be used in conjunction with each other in use. Because the occasions are different, the specifications of the products used will be different. Most of the fittings need to withstand a larger amount in use. Pulling force, some have to ensure good electrical and electrical contact at the same time, it is related to the use of towers and wires. If some one is damaged, it is likely to cause line failure. Therefore, these fittings are in quality and correctly installed. And use, have a certain impact on the line to ensure power transmission.
