1. Anchor fittings: also known as wire-resistant clamps. Because the main function of this kind of fittings is to help confine the wires, it can tightly fix the wires on the insulator string. At the same time, the confinement work of various lightning protection terminals is also required This is done with the help of anchoring hardware. Since the anchoring hardware needs to bear all the tension from the wire, the anchoring tool needs to have strong toughness and can be used as a conductor to achieve the purpose of improving the conveying capacity.
2. Suspension fittings: also known as suspension clamps. The main function of this type of fittings is to play a fixed role. Especially for the installation of many insulators, the suspension clamps need to be used to complete simple fixing work in order to meet the grid connection. For various needs, hang the wires firmly on the insulator string.
3. Contact fittings: The specific work of contact fittings is the connection of hard busbars and soft busbars as well as the lines of various electrical equipment. Because the T-connection position of the wires and the parallel connection civilians need to complete contact with the electrical equipment, contact the fittings It can provide high-quality contact stability and good electrical conductivity for the line interface, so as to ensure the reduction of the power transmission loss of the entire line, and achieve the purpose of saving the loss in the power transmission process.
4. Connecting fittings: qualified connecting fittings, connecting fittings and fittings, and various bare wire lightning rods and other equipment, such as when the insulator fails, in order to prevent serious consequences caused by the insulator failure, you can use a heavy hammer to protect the connecting fittings. Effectively avoid all kinds of accidents caused by insulator failure, and prevent the vibration of the wire, which affects the transmission of electric energy and the safety of the line.
